Sometimes we need to troubleshoot the boot process of Pogoplug V2, especially if we have installed custom firmware (e.g. ArchLinux, Debian). The best option is to have a physical serial connection. But if this is not available, we can take advantage of what’s called Netconsole. Continue reading “Configuring Netconsole on Pogoplug V2”
In this article we will see how to disassemble Pogoplug V4 and attach serial cable to the serial pads on the board. Continue reading “Pogoplug V4 Disassembly and Attaching Serial Cable”
I’ve installed Arch Linux Arm on 1GB flash drive. I want to maintain a backup of the root filesystem in case something goes wrong with the flash, so that I can restore the root filesystem to a new drive/flash and boot my system. Continue reading “Backing Up Arch Linux ARM (ALARM) on Pogoplug”
Booting Arch Linux ARM (ALARM) on Pogoplug V2 is straightforward, as long as we have only attached the USB drive/stick where ALARM is installed. But if we have any additional USB drives attached to Pogoplug, we face troubles booting ALARM. Continue reading “Booting Pogoplug From The Correct USB Disk”
If the Pogoplug is booted while the USB stick is attached, it boots the Arch Linux. But if it’s booted while the USB is detached, it simply boots the original firmware, and I can see my Pogoplug on my.pogoplug.com as normal.
I was wondering if I can swap between the original firmware and ALARM without having to detach/attach the ALARM USB stick. Continue reading “Swapping between Pogoplug Original and Custom Firmware”
I’ve decided the unlock the capabilities of my pogoplug, and explore other firmware options like Arch Linux ARM. So I had to update the version of uBoot (universal boot loader) installed on pogoplug to be able to boot from external USB drive. My pogoplug is v2, based on Marvel Krikwood SoC, which is the same architecutre used in Seagate GoFlex Net/Home, and Seagate Dockstar. Continue reading “Updating uBoot for Pogoplug V2”